Rat RIg Mill enclosure
The Rat Rig CNC Enclosure - Mill - Full Kit designed for direct compatibility our Rat Rig Mill, focusing on an easy and straightforward assembly process. The Mill can be mounted directly on the enclosure frame, improving rigidity and reducing vibration.
BOM
Bellow you will find the BOM spreadsheet for the Rat Rig Mill Enclosure.
Files
Panel dxf
Printed parts
Check our github to get access to STL files for all printed parts. All files are provided in the correct orientation for printing on a standard FDM 3D printer. In general the printed parts are quite forgiving, but are also quite large. If you suffer from drafts and/or poor bed adhesion you may need to use brims/rafts for some parts to prevent warping.The following table shows the recommended print settings when printing any of the parts provided.
Print Settings:
- Perimeters
- 4
- Line Width
- 0.45mm
- Layer height
- 0.2 - 0.3 mm
- Infill
- 25%
- Supports
- None
Rat Rig Mill enclosure CAD
CAD model for the Rat Rig Mill Enclosure is made available via the Rat Rig Fusion 360 online viewer.
Choose a model to enable the download button below.
Mechanical
Assembly Guide
Step-by-step mechanical assembly guide for the Rat Rig Mill Enclosure Kit. Click on the button or keep scrolling.
Rat Rig Mill Enclosure - Dozuki⚠️ Warning!
If you decide to follow the build guide trought this page, don't click on the "Continue with the next guide:" as it will redirect you to dozuki, just ignore the last step of each guide.
00. Main assembly
In this chapter the mechanical assembly of the Rat Rig Mill Enclosure will be completed.