build > BOM
⚠️ WARNING: Regarding the Raspberry Pi shortage
The V-Minion 1.0 requires a Raspberry Pi if you wish to use RatOS. However, due to the worldwide semiconductor shortage, availability of these can vary on a day-to-day basis. The Raspberry Pi Locator website can be of great assistance in sourcing one in your country.
V-Minion CAD
CAD model for the V-Minion 1.0 is made available via the Rat Rig Fusion 360 online viewer.
BOM
Bellow you will find the BOM spreadsheet for the V-Minion 1.0.
Official BOMFiles
Printed parts
A single archive containing STL files for all printed parts can be found by clicking here. All files are provided in the correct orientation for printing on a standard FDM 3D printer. In general the printed parts are quite forgiving, but are also quite large. If you suffer from drafts and/or poor bed adhesion you may need to use brims/rafts for some parts to prevent warping.The following table shows the recommended print settings when printing any of the parts provided.
Setting
Perimeters
Layer height
Infill
Supports
Value
4 x 0.45mm
0.2 - 0.3 mm
25%
None
When slicing the files you will notice that some of the holes are covered. This is intentional, to simplify the printing process - those layers are there to trick the slicer into building a bridge there. Once printed those need to be poked out with a screw, screwdriver, Allen key or even a matching size screw.
